EQUIPMENT FOR PRODUCTION PROFESSIONAL OWN HANDS
Production of corrugated board, a very attractive business idea - the only question is equipment. Building materials are getting more expensive every month. They are always in demand especially, such…

Continue reading →

HOW MUCH DOES THE EGG AND MEAT OF STRAUSS CREATE | FARM PROFITABILITY
Ostrich breeding is a craft that is gaining popularity in more than 100 countries. Interest in ostriches is quite obvious. Farmers love ostrich for a good increase in meat, for…

Continue reading →

COMPOSITION OF FODDER FOR Bunnies, Pigs, Hens and Cows Gives a Profitable Business
An interesting business idea about the production of granular feed from the point of view of quality and profitability. Briefly about the concept of business. The composition of granular feed…

Continue reading →

HOW TO MAKE A PLOW WITH YOUR OWN HANDS FOR A MOTOR UNIT AND A TRACTOR

Everyone can make a plow with their own hands, it is only necessary to prepare the details and adhere to the algorithm. Having mastered the production technology, you will be able to open a profitable business! Our 3D models will help you with this, as well as detailed information on each stage of production. Everything is even simpler than you think!

HOW TO MAKE A PLOW FOR A MOTOR BLOCK AND TRACTOR OWN HANDS
Drawings of the double-case PN-2-20.

First, consider a plow for a walk-behind tractor or mini tractor, which you can do with your own hands according to the drawings. For a visual analysis of the device, we recommend that you download the drawings of the PN-2-20 twin-body plow for free.

This plow is aggregated with agricultural machinery of traction class 0.2. These can be heavy walk-behind tractors or mini tractors:

Belarus-082;
Belarus-112;
Belarus-132N;
Belarus-08K;
KMZ-012, T-0.2 (Uralets);
HTZ-8 (Carpathian).
Brief technical characteristics of the PN-2-20 plow:

working width – 0.4m;
tillage depth – up to 25cm;
productivity – up to 0.05 ha / hour;
design weight – 67 kg.
The cultivation of a large plot of land is a labor-intensive and energy-intensive process, which can not do without the use of technical devices. Thanks to the plow, the soil can be properly prepared for sowing, as well as cultivated to get rid of weeds and dead wood after harvest.

The plow is attached to a mechanized technique, which, through high draft force, drives the unit in motion. In the process of working with a plow, the top layer of the soil is torn off by a ploughshare, and after that it simply turns over. This allows not only to loosen the earth, but also to improve its aeration. Moreover, tillage using a plow destroys up to 90% of weeds growing on the site!
How to make this useful unit, which is necessary in every household? First you need to take care of the acquisition of the necessary high-quality materials. For the blades of the plow you will need steel with a thickness of about 5 millimeters. The ploughshare itself should be made removable so that it can periodically be pulled out and sharpened. For the case, use hardened steel, which before welding will not hinder the treatment with anticorrosive solutions.

To make a special functional blade for the plow, be sure to adhere to the following recommendations:

From a metal sheet, cut the cylindrical working surface of the blade.
With the help of a sheet bending machine, the cut parts are bent by 22-23 degrees, while the latter are strictly adjusted to the required shape and size.
Note that the size of the hollow metal pipe for the blade is about 55-59 centimeters in length. The wall thickness should not exceed 5 millimeters.
The blade blank itself must be preheated in order to then perform matrix bending.
Directly the case for the circle can be made of a metal sheet with a thickness of at least 3-4 millimeters. A square is cut from it with sides of 50 by 50 centimeters, to which you need to sequentially attach a ploughshare, side shields and a blade. At the same time, follow strict adherence to the required angles between the components of the plow. The presence of gaps or inaccuracies during installation can adversely affect the durability of the unit. Having welded all the parts together, it is necessary to clean the seams, and it is advisable to sand the ploughshare with a blade to prevent rust.

When you learn all the intricacies of making a plow for walk-behind tractors and mini tractors, you can move on to more complex tasks.

5-plow reversible plow on T-150 (PLP-5-35):

Drawings of the five-body plow.
This is a 3D model of a 5-body reversible trailed plow PLP-5-35 for the T-150 tractor or other tractors with a towing class of 3 and higher. Using this 3D model of a plow for production, you will not need drawings. The design is disassembled into more than 100 details to the smallest detail. The project was created in 3D-format CAD files * .STEP. This format is supported by many CAD editors, including free FreeCAD.

Download negotiable 5 case on T-150

Note. Working with the STEP format in FreeCAD is not very convenient. The program requires a lot of computer resources to download all the details of the device. It only takes about 10 minutes to open a file on an average laptop. If possible, use the paid professional AutoCAD program.
HOW TO PROPERLY ADJUST THE PLOW
Plow setup on a mini tractor.
Thanks to the fact that you make the plow with your own hands, it becomes possible to adjust the dimensions of the share and the blade to all the parameters you need. You can easily adjust the width or depth of the plow depending on what kind of work to be done on the field, in the garden and orchard. You can also adjust the parameters of the plow based on how powerful your tractor (or walk-behind tractor) is. This will allow you to use the assembled unit with maximum utility, avoiding overheating or damage to the traction equipment.

HOW TO GROW STABILIZED MOSS WITH YOUR HANDS FOR BUSINESS
Do you already know the hottest design trend of the season? This is stabilized moss in a modern interior design! Pictures and even whole walls of natural moss conquer the…

...

EQUIPMENT FOR PRODUCTION PROFESSIONAL OWN HANDS
Production of corrugated board, a very attractive business idea - the only question is equipment. Building materials are getting more expensive every month. They are always in demand especially, such…

...

MINI JAM, JAM AND CONFECTIONERY HOME PRODUCTION
Equip a mini business for home production of jam products under the power of any housewife. Home mini line for the production of jam, preserves and jams includes affordable equipment…

...

MAKING UPHOLSTERED FURNITURE OWN HANDS
Making upholstered furniture with your own hands is an interesting thing and with the necessary knowledge, imagination and, most importantly, desire, you can make not just ordinary upholstered furniture, but…

...