MANUFACTURED LAMBING ON HAND MILLING MACHINE
Wooden lining (decorative cladding) in popularity overtook almost all of its counterparts. This is due to its “pluses”, which are many:
excellent sound and heat insulation;
ease of operation.
In addition to the design and protective functions, the lining also performs engineering. For cladding from the lining, you can easily hide the mechanical damage to the surface of the ceilings, floors, walls, as well as technical errors (for example, ugly wiring). Facing walls do not need preliminary alignment, which simplifies the repair process. The gaps between the material and the wall allow you to insulate the room. They are filled with special heat-insulating materials (for example, mineral wool).
LIQUID AND ASPEN LINE PRODUCTION
The basis for the production of lining is natural wood (its lower parts). Deciduous species (ash, alder, linden, aspen) with rich colors are ideal for interior decoration. Coniferous trees are more suitable for exterior decoration of houses, saunas, baths.
Linden and alder as a material for lining are especially interesting. Their advantages:
They have a low density.
Do not turn blue over time.
Do not emit tar.
Almost do not heat up.
However, they require varnish treatment. Cutters for the manufacture of forcing from hardwood due to the strength of the raw materials should be sharpened.
MANUAL MILLING MACHINE FOR OWN LINE PRODUCTION
Do-it-yourself lining is quite affordable. You will need a high-quality board and an ordinary manual milling cutter with various nozzles. With the help of the latter, corresponding grooves are made in the planks of the lining.
Cutters for the production of lining can be purchased individually or in sets. They are presented in various variations:
On the milling machine you can: process the edges of the board, drill holes, shape the grooves. Wood waste can be processed in parallel by organizing the production of fuel briquettes from sawdust.
Manual milling machine is of two types:
Lamella. It makes it possible to form various types of grooves.
Edging. His “little horse” is the processing of the perimeter of wooden planks.
The second machine is more versatile due to the possibility of performing more work.
BLOCK HOUSE MACHINE
Mill block house.
One of the types of lining (by the way, is in great demand) is a block house. The material imitates rounded logs and is widely used for exterior and interior decoration. Sheathing with a block house at home is reasonable, because such a lining has a solid appearance, is durable and environmentally friendly, as it is made of natural wood. The panels are characterized by a complex shape, so the connection of elements is carried out on the basis of the “groove-spike” principle. It is difficult to make them manually and is fraught with “inconsistency” of individual “logs” in the future, therefore it is advisable to use specialized equipment:
lining making machine.
When processing workpieces on machines, you can perform a number of operations:
cutting to the required dimensions of the prepared raw materials;
the formation of grooves (grooves and spikes).
Lines based on milling machines make it possible to produce material from edged boards. At the same time, the cost of a block house is higher than in production through automated lines with circular sawing machines. At the same time, the latter are much more expensive. In the complex, it makes sense to use additional equipment designed to impregnate the block house in order to increase the service life of flame retardants / antiseptics.